Yayınlar & Eserler

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

The Effects of Cr and Zr Additives on the Microstructure and Mechanical Properties of A356 Alloy

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, cilt.73, ss.1273-1285, 2020 (SCI İndekslerine Giren Dergi) identifier identifier

Effect of Milling Time on Dry Sliding Wear Behaviors of Carbon Nanotubes Reinforced Al Matrix Composites

JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, cilt.20, ss.2633-2638, 2020 (SCI İndekslerine Giren Dergi) identifier identifier

Influence of Ta Amount on Wear Performance of Aged 17-4 PH Stainless Steel Fabricated by Powder Metallurgy

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, cilt.72, ss.3081-3088, 2019 (SCI İndekslerine Giren Dergi) identifier identifier

An Investigation of the Wear Performance of Aged Inconel 718 Superalloy by the Fuzzy Logic Approach

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, cilt.28, ss.2853-2865, 2019 (SCI İndekslerine Giren Dergi) identifier identifier

Investigation of the wear and corrosion behaviors of Ti5Al2.5Fe and Ti6Al4V alloys produced by mechanical alloying method in simulated body fluid environment

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, cilt.94, ss.357-363, 2019 (SCI İndekslerine Giren Dergi) identifier identifier identifier

An Investigation of Wear Behaviors of AA7075 Al Hybrid Composites

HIGH TEMPERATURE MATERIALS AND PROCESSES, cilt.37, ss.619-624, 2018 (SCI İndekslerine Giren Dergi) identifier identifier

Synthesis and Characterization of Zinc Fluoroborate from Zinc Fluoride and Boron by Mechanochemical Reaction

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, cilt.42, ss.4409-4416, 2017 (SCI İndekslerine Giren Dergi) identifier identifier

The Effects of Molding Materials on Microstructure and Wear Behavior of A356 Alloy

HIGH TEMPERATURE MATERIALS AND PROCESSES, cilt.36, ss.515-521, 2017 (SCI İndekslerine Giren Dergi) identifier identifier

Microstructure-bifilm interaction and its relation with mechanical properties in A356

INTERNATIONAL JOURNAL OF CAST METALS RESEARCH, cilt.30, ss.20-29, 2017 (SCI İndekslerine Giren Dergi) identifier identifier

Investigation of microstructure and wear behaviors of al matrix composites reinforced by carbon nanotube

FULLERENES NANOTUBES AND CARBON NANOSTRUCTURES, cilt.24, ss.467-473, 2016 (SCI İndekslerine Giren Dergi) identifier identifier

Dry Sliding Wear Behaviours of Valve Seat Inserts Produced from High Chromium White Iron

HIGH TEMPERATURE MATERIALS AND PROCESSES, cilt.34, ss.635-641, 2015 (SCI İndekslerine Giren Dergi) identifier identifier

The Effects of T5 and T6 Heat Treatments on Wear Behaviour of AA6063 Alloy

HIGH TEMPERATURE MATERIALS AND PROCESSES, cilt.33, ss.231-237, 2014 (SCI İndekslerine Giren Dergi) identifier identifier

THE EFFECTSON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF FILTRATION IN Al-Si-Mg ALLOYS

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY, cilt.29, ss.271-279, 2014 (SCI İndekslerine Giren Dergi) identifier

Effects of Re-Aging on the Fatigue Properties of Aluminum Alloy AA7075

MATERIALS TESTING, cilt.56, ss.575-582, 2014 (SCI İndekslerine Giren Dergi) identifier identifier

Effects of Different Heat Treatment Conditions on Fatigue Behavior of AA7075 Alloy

HIGH TEMPERATURE MATERIALS AND PROCESSES, cilt.32, ss.345-351, 2013 (SCI İndekslerine Giren Dergi) identifier identifier

THE EFFECT OF DIFFUSER AND NON-DIFFUSER RUNNER SYSTEMS ON THE MECHANICAL PROPERTIES OF A356 ALLOY

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY, cilt.28, ss.241-249, 2013 (SCI İndekslerine Giren Dergi) identifier identifier

The Effect of Aging and Sliding Speed on Wear Behaviour of Cu-Cr-Zr Alloy

MATERIALS TESTING, cilt.55, ss.468-471, 2013 (SCI İndekslerine Giren Dergi) identifier identifier

The tribological properties of A356-SiCp metal-matrix composites fabricated by thixomoulding technique

SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS, cilt.19, ss.351-356, 2012 (SCI İndekslerine Giren Dergi) identifier identifier

THE EFFECTS OF RETROGRESSION PARAMETERS ON HARDNESS AND WEAR BEHAVIOURS OF 7075 ALUMINIUM ALLOYS

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY, cilt.27, ss.429-438, 2012 (SCI İndekslerine Giren Dergi) identifier identifier

THE EFFECTS OF RETROGRESSION PARAMETERS IN RRA TREATMENT ON TENSILE STRENGTH OF 7075 ALUMINIUM ALLOYS

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY, cilt.27, ss.193-203, 2012 (SCI İndekslerine Giren Dergi) identifier identifier

The effect of retrogression parameters in RRA treatment on tensile of 7075 aluminium alloys

Journal Of The Faculty Of Engineering And Architecture Of Gazi University, cilt.27, ss.193-203, 2012 (SCI İndekslerine Giren Dergi) identifier identifier

Effect of ageing treatment on wear properties and electrical conductivity of Cu-Cr-Zr alloy

BULLETIN OF MATERIALS SCIENCE, cilt.34, ss.1465-1470, 2011 (SCI İndekslerine Giren Dergi) Creative Commons License identifier identifier

An investigation into the wear behaviour of TiB2 particle reinforced aluminium composites produced by mechanical alloying

SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS, cilt.18, ss.5-12, 2011 (SCI İndekslerine Giren Dergi) identifier identifier

Wear Properties of Titanium and Ti6Al4V Titanium Alloy by Mechanical Milling

HIGH TEMPERATURE MATERIALS AND PROCESSES, cilt.30, ss.175-180, 2011 (SCI İndekslerine Giren Dergi) identifier identifier

An Investigation on Wear Resistance of SiCp-Reinforced Aluminium Composites Produced by Mechanical Alloying Method

SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS, cilt.17, ss.31-38, 2010 (SCI İndekslerine Giren Dergi) identifier identifier

Production of Hypo-eutectic Al-Si Alloy Based Metal Matrix Composite with Thixomoulding Processing

HIGH TEMPERATURE MATERIALS AND PROCESSES, cilt.29, ss.169-178, 2010 (SCI İndekslerine Giren Dergi) identifier identifier

Investigation of wear behaviors of C95200-C95300 Cu-Al-Fe alloys

INDUSTRIAL LUBRICATION AND TRIBOLOGY, cilt.61, ss.40-46, 2009 (SCI İndekslerine Giren Dergi) identifier identifier

Diğer Dergilerde Yayınlanan Makaleler

The Effect of Different Sliding Speeds on Wear Behavior of ZrO2 Reinforcement Aluminium Matrix Composite Materials

International Advanced Researches and Engineering Journal, cilt.4, ss.1-7, 2020 (Diğer Kurumların Hakemli Dergileri)

Production and Characterization of Al-SiC Composites Prepared by Mechanical Milling and Pressureless Sintering

Bitlis Eren Üniversitesi Fen Bilimleri Dergisi, cilt.8, ss.227-233, 2019 (Diğer Kurumların Hakemli Dergileri)

Investigation of the effects of Mg amount on microstructure and wear behavior of Al-Si-Mg alloys

ENGINEERING SCIENCE AND TECHNOLOGY-AN INTERNATIONAL JOURNAL-JESTECH, cilt.22, ss.370-375, 2019 (ESCI İndekslerine Giren Dergi) identifier identifier

Mekanik alaşımlama/ öğütme yöntemi ile üretilen Al-SiC kompozitlerin incelenmesi

Technological Applied Sciences, cilt.13, ss.165-171, 2018 (Diğer Kurumların Hakemli Dergileri)

Yaşlandırılmış AA7075 Alaşımında Solüsyona Alma Sıcaklığının Aşınma Performansına Etkisinin İncelenmesi

Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji, cilt.6, ss.234-239, 2018 (Diğer Kurumların Hakemli Dergileri) Creative Commons License

Toz Metalurjisi Yöntemiyle Üretilen 7075 Al Alaşımlarında Mn Miktarının Aşınma Davranışlarına Etkisinin İncelenmesi

Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji, cilt.6, ss.23-30, 2018 (Diğer Kurumların Hakemli Dergileri) Creative Commons License

AA7075 ALAŞIMININ T6 ISIL İŞLEMİNDE YAŞLANDIRMA SÜRESİNİN AŞINMA DAVRANIŞI ÜZERİNE ETKİSİ

İleri Teknoloji Bilimleri Dergisi, cilt.7, ss.42-49, 2018 (Diğer Kurumların Hakemli Dergileri)

ANALYSIS OF AA7075 ALUMINUM ALLOY WITH FINITE ELEMENT METHOD FORMED BY EQUAL CHANNEL ANGULAR PRESSING PROCESS

INTERNATIONAL REFEREED JOURNAL OF ENGINEERING AND SCIENCES, ss.92-104, 2015 (Diğer Kurumların Hakemli Dergileri)

Analisys of AA7075 Aluminum alloy with finite element mothod formed by aqual channel angular pressing process

International Refereed Journal of Engineering and Sciences, ss.82-104, 2015 (Diğer Kurumların Hakemli Dergileri)

Mekanik Alaşımlama ile üretilmiş Çinko Alüminyum ZnA alaşımlarının kuru sürtünmeli aşınma davranışlarının incelenmesi

Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji, cilt.2, ss.309-313, 2014 (Diğer Kurumların Hakemli Dergileri)

The Effects of Mould Materials on Microstructure and MechanicalProperties of Cast A356 Alloy

Journal of Advanced Materials and Processing, cilt.2, ss.3-12, 2014 (Diğer Kurumların Hakemli Dergileri)

ZA 8 Alaşımının Savurma Kokil ve Kum Kalıplara Dökümlerinin Mekanik Özelliklere Etkisinin İncelenmesi

Teknoloji, Karabük Üniversitesi, cilt.3, ss.115-120, 2000 (Diğer Kurumların Hakemli Dergileri)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

B4C Takviyeli Alüminyum Matris Kompozitlerin Farklı Çözeltilerdeki Korozyon Davranışları

The International Aluminium-Themed Engineering And Natural Sciences Conference (IATENS’19), 4 - 06 Ekim 2019, ss.708-712

ZrO2 Takviyeli Alüminyum Matrisli Kompozit Malzemelerin Farklı Kayma Hızlarındaki Aşınma Performansı

The International Aluminium-Themed Engineering And Natural Sciences Conference (IATENS’19), 4 - 06 Ekim 2019, ss.701-707

Mekanik Alaşımlama Yöntemi İle Üretilen TiB2 Takviyeli Titanyum Alaşım Kompozit Malzemelerin Karakterizasyonu

The International Aluminium-Themed Engineering And Natural Sciences Conference (IATENS’19), 4 - 06 Ekim 2019, ss.697-700

Mekanik Öğütme İle Üretilen Ön Alaşımlanmış Gaz Atomize Ti6Al4V Alaşımının Karakterizasyonu

3rd International Engineering Research Symposium (INERS’19), 5 - 07 Eylül 2019, ss.289-292

Toz Metalürjisi Yöntemiyle Üretilen 17-4 PH Paslanmaz Çeliklerde Mo Miktarının Korozyon Davranışlarına Etkisi

The Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology, 21 - 23 Haziran 2019, ss.1105-1108

Farklı Presleme Basınçları İle Üretilen Toz Metal Çeliklerin Aşınma Davranışlarının Belirlenmesi

The Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology, 21 - 23 Haziran 2019, ss.685-689

Ti6Al4V Alaşımının Toz Metalürjisi Yöntemi İle Üretimi Ve Karakterizasyonu

The Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology, 21 - 23 Haziran 2019, ss.681-684

Mekanik Öğütülen Sünger Titanyumun ve Gaz Atomize Titanyum Tozların Karakterizasyonu

3rd International Symposium on Innovative Approaches in Scientific Studies, 19 - 21 Nisan 2019, cilt.4, ss.549-552

Yarı-Katı İşlem Yöntemi ile Üretilen Al-SiC Kompozit Malzemelerin Aşınma Davranışlarının İncelenmesi

3rd International Symposium on Innovative Approaches in Scientific Studies, 19 - 21 Nisan 2019, cilt.4, ss.545-548

Microstructure and Dry Sliding Wear Behaviour of Al2 GraphiteAlloy Reinforced with Different Al2O3 Content

1. INTERNATIONAL TECHNOLOGICAL SCIENCES AND DESIGN SYMPOSIUM, Giresun, Türkiye, 27 - 19 Haziran 2018, ss.844-854

The nanofabrication and unique properties of graphene/diamond nanocone arrays

8th International Advances in Applied Physics and Materials Science Congress Exhibition (APMAS 2018), 24 - 30 Nisan 2018

AA7075 Alaşımının Yaşlandırma Sıcaklığının Aşınma Üzerine Etkisi

8.th International Advanced Technologies Symposium (IATS) 2017, 19 - 21 Ekim 2017, ss.1030-1036

Investigation of the corrosion properties of high-energy ball milled Ti6Al4V alloy

5th International Conference on Powder Metallurgy Advanced Materials, 17 - 20 Eylül 2017

Effect of milling time on wear behaviours of carbon nanotubes reinforced aluminium matrix composites

5th International Conference on Powder Metallurgy Advanced Materials, 17 - 20 Eylül 2017

The effect of iron addition to Nickel-Aluminum bronze produced by mechanical alloying on the wear behaviors

5th International Conference on Powder Metallurgy Advanced Materials, Cluj-Napoca, 17 - 20 Eylül 2017

Microstructure and mechanical properties of Sn-9Zn-xAl and Sn-9Zn-xCu lead-free solder alloys

4th International Conference on Materials Science and Nanotechnology, 28 - 30 Haziran 2017

The effect of Ni addition on the microstructure and mechanical properties of A356 alloy

4th International Conference on Materials Science and Nanotechnology For Next Generation, 28 - 30 Haziran 2017

Investigation of the Wetting Properties of Ternary Lead-Free Solder Alloys on Copper Substrate

6th International Advances in AppliedPhysics and Materials ScienceCongress Exhibition(APMAS 2016), 1 - 03 Haziran 2016

The effect of deformation on the sphericity of A356 alloy produced by thixomolding process

1st International Conference on Engineering Technology and Applied Sciences, AFYONKARAHİSAR, Türkiye, 21 - 22 Nisan 2016

An investigation into the effects of Mg amount on wear behaviours of Al Si Mg alloys

Uluslararası Katılımlı 1. Savunma Sanayi Sempozyumu, Kırıkkale, Türkiye, 9 - 10 Nisan 2015

Mekanik Alaşımlama ile Üretilen Nikel Alüminyum Bronzlarının Aşınma Davranışları

5.th. International Advanced Tec. Sym. (IATS’09), 13 - 15 Mayıs 2009, ss.1101-1104

C95200 ve C95300 Aluminyum Bronzları ve Aşınma Davranışları

11th International Materials Symposium, 19 - 21 Nisan 2006, ss.209-214