Yayınlar & Eserler

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Pure Bending Fatigue Crack Propagation in Deep-Drawn Steel Cord Filaments

Metal Science and Heat Treatment, cilt.61, ss.691-697, 2020 (SCI Expanded İndekslerine Giren Dergi) identifier

Influence of Sn addition on microstructure and corrosion resistance of AS21 magnesium alloy

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, cilt.29, ss.1413-1423, 2019 (SCI İndekslerine Giren Dergi) identifier identifier

Thermal investigation of fine alumina powder reinforced Na-metakaolin-based geopolymer binder for refractory applications

Journal of the Australian Ceramic Society, cilt.55, ss.587-593, 2019 (SCI Expanded İndekslerine Giren Dergi) identifier identifier

Effect of drawing strain on fatigue behavior of steel tire cord filaments

MATERIALS TESTING, cilt.60, ss.1171-1174, 2018 (SCI İndekslerine Giren Dergi) identifier identifier

Microstructure and corrosion properties of lanthanum-added AZ31 Mg alloys

ARABIAN JOURNAL OF GEOSCIENCES, cilt.11, 2018 (SCI İndekslerine Giren Dergi) identifier identifier

The effect of head hardening process on the residual stress of rails

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART F-JOURNAL OF RAIL AND RAPID TRANSIT, cilt.232, ss.589-595, 2018 (SCI İndekslerine Giren Dergi) identifier identifier

Mechanical Properties and Corrosion Behavior of As-Cast Mg-Zn-Zr-(La) Magnesium Alloys

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, cilt.27, ss.389-397, 2018 (SCI İndekslerine Giren Dergi) identifier identifier

An investigation on dry sliding wear behaviour of pressure infiltrated AA1050-XMg/B4C composites

SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS, cilt.25, ss.67-73, 2018 (SCI İndekslerine Giren Dergi) identifier identifier

The effect of GNPs on wear and corrosion behaviors of pure magnesium

JOURNAL OF ALLOYS AND COMPOUNDS, cilt.724, ss.14-23, 2017 (SCI İndekslerine Giren Dergi) identifier identifier

Effect of Zn and Mn Additions on the Wear Resistance of Cast Alloy Mg-5% Al-1% Si

METAL SCIENCE AND HEAT TREATMENT, cilt.59, ss.161-167, 2017 (SCI İndekslerine Giren Dergi) identifier identifier

Effect of the additions of dehydrated geopolymer powders on compressive strength and integrity of the final geopolymer

JOURNAL OF CERAMIC PROCESSING RESEARCH, cilt.16, ss.662-666, 2015 (SCI İndekslerine Giren Dergi) identifier identifier

Mechanical properties of pattern welded 1075-15n20 steels

Materialpruefung/Materials Testing, cilt.56, ss.897-900, 2014 (SCI Expanded İndekslerine Giren Dergi) identifier

Wear behaviours of Pb added Mg-Al-Si composites reinforced with in situ Mg2Si particles

MATERIALS & DESIGN, cilt.50, ss.929-935, 2013 (SCI İndekslerine Giren Dergi) identifier identifier

Effect of copper addition on wear and corrosion behaviours of Mg2Si particle reinforced composites

Materials and Design, cilt.36, ss.451-458, 2012 (SCI Expanded İndekslerine Giren Dergi) identifier

Mechanical and wear behaviors of Al-12Si-XMg composites reinforced with in situ Mg2Si particles

MATERIALS & DESIGN, cilt.32, ss.2983-2987, 2011 (SCI İndekslerine Giren Dergi) identifier identifier

Production and corrosion behaviours of the Al-12Si-XMg alloys containing in situ Mg2Si particles

Journal of Alloys and Compounds, cilt.503, ss.122-126, 2010 (SCI Expanded İndekslerine Giren Dergi) identifier identifier

Wear and corrosion behaviours of extruded Al-12Si-XMg alloys

MATERIALS LETTERS, cilt.62, ss.3490-3492, 2008 (SCI İndekslerine Giren Dergi) identifier identifier

Diğer Dergilerde Yayınlanan Makaleler

Ca and Ce Effect on the Corrosion Resistance of Hot-Rolled AZ31 Mg Alloys

ENGINEERING TECHNOLOGY & APPLIED SCIENCE RESEARCH, cilt.10, ss.5113-5116, 2020 (ESCI İndekslerine Giren Dergi) identifier

The Immersion Corrosion Resistance of Shot Peening and MAO Applied on AZ31-0.5% La Sheets

ENGINEERING TECHNOLOGY & APPLIED SCIENCE RESEARCH, cilt.10, ss.5201-5204, 2020 (ESCI İndekslerine Giren Dergi) identifier

Production of ZrO2 Reinforced AZ31 Matrix Composites via Powder Metallurgy

Advanced Science, Engineering and Medicine, cilt.11, ss.471-474, 2019 (Diğer Kurumların Hakemli Dergileri)

Effect of carbon content and drawing strain on the fatigue behavior of tire cord filaments

ENGINEERING SCIENCE AND TECHNOLOGY-AN INTERNATIONAL JOURNAL-JESTECH, cilt.21, ss.289-296, 2018 (ESCI İndekslerine Giren Dergi) identifier identifier

INVESTIGATION OF MICROSTRUCTURE, HARDNESS AND WEAR PROPERTIES OF MWCNT REINFORCED AZ91 MAGNESIUM MATRIX COMPOSITES

InternationalJournal of Mechanical and Production Engineering, cilt.6, ss.45-47, 2018 (Diğer Kurumların Hakemli Dergileri)

EFFECT OF Y ADDITION ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF AS-CAST MG-ZN-ZR-LA MAGNESIUM ALLOYS

InternationalJournal of Mechanical and Production Engineering, cilt.6, ss.38-40, 2018 (Diğer Kurumların Hakemli Dergileri)

Electrochemical Corrosion Behavior of Mg-5Al-1Ti XZn Alloys

International Journal of Advances in Science, Engineering and Technology, cilt.6, ss.37-40, 2018 (Diğer Kurumların Hakemli Dergileri)

EFFECT OF COPPER ADDITIONS ON MICROSTRUCTURE CASTING AND MECHANICAL PROPERTIES OF AZ91 MAGNESIUM ALLOY

InternationalJournal of Mechanical and Production Engineering, cilt.6, ss.41-44, 2018 (Diğer Kurumların Hakemli Dergileri)

A comparative study on corrosion behaviors of pearlitic rails generally used in railway tracks

Engineering and Technology Journal, cilt.2, ss.264-269, 2017 (Diğer Kurumların Hakemli Dergileri)

Effect of Cooling Rate and 2 Wt Silicon Addition on Microstructure and Mechanical Properties of AZ91 Mg Alloys

International Journal of Mechanical and Production Engineering (IJMPE), cilt.5, ss.25-28, 2017 (Diğer Kurumların Hakemli Dergileri)

Effect of Sn Addition on Microstructure and Mechanical Properties of as-Cast And Hot-Rolled Am60 Magnesium Alloys

International Journal of Mechanical and Production Engineering (IJMPE), cilt.5, ss.22-24, 2017 (Diğer Kurumların Hakemli Dergileri)

Effect of Sn Addition on Mechanical Properties of AS21 Magnesium Alloys

International Journal of Mechanical And Production Engineering, cilt.5, ss.33-34, 2017 (Diğer Kurumların Hakemli Dergileri)

Effect of Ti Addition on Microstructure and Mechanical Properties of As-cast and Hot-rolled AZ31 Magnesium Alloys

International Journal of Mechanical And Production Engineering, cilt.5, ss.19-21, 2017 (Diğer Kurumların Hakemli Dergileri)

Microstructure and Corrosion Properties of Homogenized Mg-4Zn-1La Magnesium Alloy

Key Engineering Materials, cilt.750, ss.118-123, 2017 (Diğer Kurumların Hakemli Dergileri)

Effect of Ti Addition on Corrosion Properties of As-Cast and Hot-Rolled AM60 Magnesium Alloys

Key Engineering Materials, cilt.750, ss.113-117, 2017 (Diğer Kurumların Hakemli Dergileri)

Effect of Sn Addition on Corrosion Properties of As-Cast and Hot-Rolled AZ31 Magnesium Alloys

Key Engineering Materials, cilt.750, ss.124-128, 2017 (Diğer Kurumların Hakemli Dergileri)

“Microstructure and Corrosion Properties of Homogenized AZ31 and AZ31 1 La Magnesium Alloys

Key Engineering Materials, cilt.750, ss.107-112, 2017 (Diğer Kurumların Hakemli Dergileri)

The Relationship Between Fatigue Crack Growth and Residual Stress in Rails

World Academy of Science, Engineering and TechnologyInternational Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering, cilt.10, ss.1194-1199, 2016 (Diğer Kurumların Hakemli Dergileri)

Tyhe relationship between fatique crack growth and residual stress in rails

World Academy of Science, Engineering and TechnologyInternational Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering, cilt.10, ss.1169-1174, 2016 (Diğer Kurumların Hakemli Dergileri)

The Relationship Between Fatique Crack Growth and Residual Strees in Rails

International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering, cilt.10, ss.1169-1174, 2016 (Diğer Kurumların Hakemli Dergileri)

Influence of Titanium Addition on Wear Properties of AM60 Magnesium Alloy

International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering, cilt.10, ss.708-712, 2016 (Diğer Kurumların Hakemli Dergileri)

Wear Behaviors of B4C and SiC Particle Reinforced AZ91 Magnesium Matrix Metal Composites

International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering, cilt.10, ss.708-712, 2016 (Diğer Kurumların Hakemli Dergileri)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

High temperature wear performances of TiB2 and GNPs reinforced magnesium matrix hybrid composites

The International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology (IMSMATEC’xx20), İstanbul, Türkiye, 24 - 26 Haziran 2020

Paslanmaz Çelik Matrisli Fonksiyonel Derecelendirilmiş Malzeme Üretimi ve Karakterizasyonu

UDCS’19 Fourth International Iron and Steel Symposium, Karabük, Türkiye, 4 - 06 Nisan 2019

The effect of Ca and Ce on Wear Behavior of Hot-Rolled AZ31 Mg Alloys

6th International Conference on Computational and Experimental Science and Engineering, 23 - 27 Ekim 2019

The effect of Ca and Ce on Corrosion Resistance of Hot-Rolled AZ31 Mg Alloys

6th International Conference on Computational and Experimental Science and Engineering (ICCESEN 2019), 23 - 27 Ekim 2019

Wear Properties of Micro Arc Oxidation Coated and Shot Peening Applied AZ31 Mg Sheets.

“6th International Conference on Computational and Experimental Science and Engineering (ICCESEN 2019), 23 - 27 Ekim 2019

Immersion Corrosion Properties of Micro Arc Oxidation Coated and Shot Peening Applied AZ31 Mg Sheets.

“6th International Conference on Computational and Experimental Science and Engineering (ICCESEN 2019), 23 Ekim - 27 Aralık 2019

DRY WEAR BEHAVIOUR OF MAO APPLIED AZ31 SHEET ALLOYS CONTAINING NEODYMIUM

4.International Conference on Material Science and Technology, 18 - 20 Ekim 2019

INVESTIGATION OF TECHNICAL CHARACTERISTICS AFTERBENDING IN P11 QUALITY STEEL PIPES

The Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology in Cappadocia/TURKEY (IMSMATEC’19), June 21-23 2019, 21 - 23 Haziran 2019

ALÜMİNYUM BRONZLARININ AŞINMA DAVRANIŞLARININ İNCELENMESİ

The Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology in CAPPADOCIA/TURKEY (IMSMATEC’19), 21 - 23 Haziran 2019, ss.59-62

WELDING OF BINARY METHOD IN HIGH ALLOY STEELS

IMSMATEC 19, Nevşehir, Türkiye, 21 - 23 Haziran 2019

NEODİMYUM İLAVELİ ZK60 MAGNEZYUM ALAŞIMI MİKROYAPI, MEKANİK ÖZELLİK VE YORULMA DAVRANIŞININ İNCELENMESİ

The Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology in CAPPADOCIA/TURKEY (IMSMATEC’19), 21 - 23 Haziran 2019, ss.32-36

Bilyeli Dövme ve MaO İşlemi Uygulanmış 4,7m/dk ve 10m/dk Hadde Hızlarında Haddelenmiş AZ31-0,5La Alaşımının Korozyon Direncinin İncelenmesi

The Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology, 21 - 23 Haziran 2019

1 (AĞ.OL) Ca İLAVELİ AZ31 Mg ALAŞIMLARININ AŞINMA ÖZELLİKLERİNE HADDE HIZININ ETKİSİ

The Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology, 21 - 23 Haziran 2019

Investigation of the Neodymium Additive ZK60 Magnesium Alloy Microstructure, Mechanical Properties and Fatigue Behavior

The Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology, Nevşehir, Türkiye, 21 - 23 Haziran 2019, ss.32-36

Determination of Life of Steel Pipes Used in Thermal Power Plants

UDCS’xx19 Fourth International Iron and Steel Symposium, 4-6 April, Karabuk, 4 - 06 Nisan 2019

Hardness Distribution in P91 Steels after Welding Process and PWHT

UDCS’xx19 Fourth International Iron and Steel Symposium, 4-6 April, Karabuk, 4 - 06 Nisan 2019

Design and Manufacturing of Bending Rotating Fatig Test Device of Small Section Solid Round Wires

UDCS’xx19 Fourth International Iron and Steel Symposium, 4-6 April, Karabuk, 4 - 06 Nisan 2019

Paslanmaz Çelik Matrisli Fonksiyonel Derecelendirilmiş Malzeme Üretimi ve Karakterizasyonu

UDCS’xx19 Fourth International Iron and Steel Symposium, 4-6 April, Karabuk, 4 - 06 Nisan 2019

Alüminyum-Çelik-Alüminyum Tabakalı Kompozitlerde Yorulma Davranışı

1st International Symposium on Light Alloys and Composite Materials, 22 - 24 Mart 2018

The microstructure and mechanical properties of homogenized AZ31 Mg alloys containing La in the range of 02 to 1.0

International Congress on Mathematic, Engineering, Natural and Health Science, 11 - 13 Ağustos 2018

SERVİS KOŞULLARINDA GERİNİM ÖLÇERLER KULLANARAKDEMİR YOLU RAYLARINDA GERİLME ÖLÇÜMÜ

4. Uluslararası Raylı Sistemler Mühendisliği Sempozyumu (ISERSE’18, 10 Aralık - 12 Ekim 2018

Türkiye’de üretilen ilk R350Ht kalite rayların karekterizasyonu ve servis şartlarındaki başarısı

4. Uluslararası Raylı Sistemler Mühendisliği Sempozyumu (ISERSE’18), Karabük, Türkiye, 10 - 12 Ekim 2018

EFFECT OF ND ON WEAR BEHAVIOUR OF HOT ROLLED AZ31 Mg ALLOY

3nd International Conference on Material Science and Technology in Cappadocia (IMSTEC’18) Nevsehir, Turkey, 17 - 19 Eylül 2018, ss.198-201

The microstructure and corrosion properties of homogenized AZ31 Mg alloys containing La in the range of 02 to 1.0

International Congress on Mathematic, Engineering, Natural and Health Science, 11 - 13 Ağustos 2018

AZ91 Alaşımına İlave Edilen Sr ve TiB Elementleri İle Soğuma Hızının Mikroyapı ve Mekanik Özellikleri Üzerine Etkisi

1st International Symposium on Light Alloys and Composite Materials (ISLAC’xx18), Karabük, Türkiye, 22 - 24 Mart 2018, ss.380-381

An investigation of the effect of La addition on wear properties of ZK60 magnesium alloy

VIIIth International Conference on Researches in Science Technology, 10 - 11 Haziran 2018

Development, Coding and Training of Robotic Arms in Welding Applications

International Congress on Engineering and Life Science, Kastamonu, Türkiye, 26 - 29 Nisan 2018, ss.810

Electrochemical Corrosion Behavior Of Mg-5Al-Ti-XZn Alloys

2018 IIER 395th International Conference on Recent Innovations in Engineering and Technology (ICRIET), 24 - 25 Nisan 2018, ss.59-62

Investigation Of Microstructure, Hardness And Wear Properties Of Mwcnt Reinforced AZ91 Magnesium Matrix Composites

2018 IIER 395th International Conference on Recent Innovations in Engineering and Technology (ICRIET), 24 - 25 Nisan 2018, ss.63-65

Effect Of Y Addition On Microstructure And Mechanical Properties Of As-Cast Mg-Zn-Zr-La Magnesium Alloys.

2018 IIER 395th International Conference on Recent Innovations in Engineering and Technology (ICRIET), 24 - 25 Nisan 2018, cilt.52

Investigation Of Microstructure, Hardness And Wear Properties Of MWCNT Reinforced AZ91 Mg Matrix Composites

2018 IIER 395th International Conference on Recent Innovations in Engineering and Technology (ICRIET), 24 - 25 Nisan 2018

Investigation of Rolling Capability of AZ31- 1La wt Mg Alloys

1st International Symposium on Light Alloys and Composite Materials (ISLAC’18), 22 - 24 Mart 2018

AZ91 Alaşımına Sb Elementi İlavesi İle Soğuma Hızının Mikroyapı ve Mekanik Özellikleri Üzerine Etkisi

1st International Symposium on Light Alloys and Composite Materials (ISLAC’18), 22 - 24 Mart 2018

AM60 Alaşımının Mekanik özelliklerine İlave Edilen Sn ve Pb Elementleri İle Soğuma Hızının Etkisi

1st International Symposium on Light Alloys and Composite Materials (ISLAC’18), 22 - 24 Mart 2018

Effect of homogenization treatment on microstructure and corrosion properties of Mg-4Zn magnesium alloys

1st International Symposium on Light Alloys and Composite Materials (ISLAC’18), 22 - 24 Mart 2018

Microstructure and Mechanical Properties of Mg-xAl-GNPs composites

1st International Symposium on Light Alloys and Composite Materials (ISLAC’18), 22 - 24 Mart 2018

PATERN KAYNAK YÖNTEMİ İLE 15N20 VE 1075 KALİTE ÇELİKLERİ KULLANILARAK ÜRETİLEN DAMASCUS ÇELİĞİNİN EĞMELİ YORULMA DAVRANIŞININ İNCELENMESİ

1st International Symposium on Light Alloys and Composite Materials (ISLAC’18), Karabük, Türkiye, 22 - 24 Mart 2018, ss.190-192 Creative Commons License

, Effects of Shot Peening on The Microstructure and Corrosion Properties of AZ31 And AZ31-%0.2 La Mg Alloys

1st International Symposium on Light Alloys and Composite Materials, Karabük, Türkiye, 22 - 24 Mart 2018, ss.225

Mechanical Properties of As-cast and Hot-Rolled AM60-xTi Magnesium Alloys

2nd International Conference on Materials Science and Technology, 11 - 13 Ekim 2016

CuCoNiBe Alaşımına Uygulanan Yaşlandırma Isıl İşleminin Mekanik ve Aşınma Özelliklerine Etkisinin İncelenmesi

2nd International Conference on Material Science and Technology in Cappadocia (IMSTEC’17), 11 - 13 Ekim 2017

The effect of La on the Wear Resistance of the Hot Rolled AZ31 Mg Alloy

1st International Conference of Advanced Materials and Manufacturing Technologies (ICAMT’17), 25 - 27 Ekim 2017

Investigation of Microstructure and Mechanical Properties of Termite and Flash Butt Welded Rail

1. Uluslararası İleri Malzeme ve İmalatTeknolojileri Konferansı (ICAMT’17), 25 - 27 Ekim 2017

Investigation of Wear Characteristics of Composite Brake Material Used in Rail Systems

1. Uluslararası İleri Malzeme ve İmalat Teknolojileri Konferansı, 25 - 27 Ekim 2017

Comparison of Mechanical Properties of Honeycomb Composite Materials Used in Airplane Industries

1st International Conference of Advanced Materials and Manufacturing Technologies, 25 - 27 Ekim 2017

Effect of Heat Treatment on Corrosion Behaviour of Co-Cr and Ni-Cr Implant Materials Used for Dental Application

1st International Conference of Advanced Materials and Manufacturing Technologies, 25 - 27 Ekim 2017

Effect of Heat Treatment on corrosion behaviour of Co-Cr and Ni-Cr ımplant materials used for dental application

1st International Conference of Advanced Materials and Manufacturing Technologies, 25 - 27 Ekim 2017

Production of ZrO2 Reinforced AZ31 Matrix Composşites Via Powder Metallurgy

4th International Conference on Computational and Experimental Science and Engineering (ICCESEN 2017), 4 - 08 Ekim 2017

MECHANICAL PROPERTIES OF AS-CAST AND HOT-ROLLED AM60-XTİ MAGNESIUM ALLOYS

2nd International Conference on Material Science and Technology in Cappadocia (IMSTEC’17), 11 - 13 Ekim 2017, ss.764

CuCoNiBe ALAŞIMINA UYGULANAN YAŞLANDIRMA ISIL İŞLEMİNİN MEKANİK VE AŞINMA ÖZELLİKLERİNE ETKİSİNİN İNCELENMESİ

2nd International Conference on Material Science and Technology in Cappadocia (IMSTEC’17), 11 - 13 Ekim 2017, ss.754

Texture and Mechanical Properties of La added AZ31 Mg alloys

4th International Conference on Computational and Experimental Science and Engineering (ICCESEN 2017), 4 - 09 Ekim 2017

La Effect on Microstructure and Corrosion Properties of Rolled AZ31 and Modified AZ31 Mg Alloys

4th International Conference on Computational and Experimental Science and Engineering (ICCESEN 2017), 4 - 09 Ekim 2017

Oxidation Behavior of NiCr Bond Coated Thermal Barrier Coatings (TBCs) Produced with Atmospheric Plasma Spray

4th INTERNATIONAL CONFERENCE ON COMPUTATIONAL AND EXPERIMENTAL SCIENCE AND ENGINEERING (ICCESEN-2017), 4 - 08 Ekim 2017

Investigation of Hot Corrosion Behavior of Thermal Barrier Coating (TBC) Systems with Rare Earth Content

4th INTERNATIONAL CONFERENCE ON COMPUTATIONAL AND EXPERIMENTAL SCIENCE AND ENGINEERING (ICCESEN-2017), 4 - 08 Ekim 2017

Accelerated Cooling Heat Treatment of Equilateral Angle and Hea-Heb Profiles

3rd Iron and Steel Symposium(UDCS’17) 3-5April 2017 Karabuk-TURKEY, 3 - 05 Nisan 2017

Corrosion Behaviour of Steel Wire Rod

3rd Iron and Steel Symposium(UDCS’17)3-5April 2017 Karabuk-TURKEY, 3 - 05 Nisan 2017

Influence of Head Hardening Process on Fracture Toughness in Rails

3rd Iron and Steel Symposium(UDCS’17)3-5April 2017 Karabuk-TURKEY, 3 - 05 Nisan 2017

Pure Bending Fatigue Behaviors Of 80 C Steel Cord Filaments

3rd Iron and Steel Symposium(UDCS’17)3-5April 2017 Karabuk-TURKEY, 3 - 05 Nisan 2017

Effect of Carbon Content on the Wear Behaviour of Eutectoid Steel Wire Rod

3rd Iron and Steel Symposium(UDCS’17)3-5April 2017 Karabuk-TURKEY, 3 - 05 Nisan 2017

Effect of Sn Addition on Mechanical Properties of AS21 Magnesium Alloy

178th International Conferences on Metallurgy Technology and Materials (ICMTM), 11 - 12 Mayıs 2017

Effect of Ti Addition on Microstructure and Mechanical Properties of As-cast and Hot-Rolled AZ31

178th International Conferences on Metallurgy Technology and Materials (ICMTM), 11 - 12 Mayıs 2017

EFFECT OF INDIUM ADDITION ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF AS-CAST AND HOT-ROLLED AM60 MAGNESIUM ALLOY

26th International Conference on Metallurgy and Materials (METAL), Brno, Çek Cumhuriyeti, 24 - 26 Mayıs 2017, ss.1537-1542 identifier identifier

Microstructure and corrosion properties of homogenized Mg-4Zn-1La magnesium alloy

6th International Conference on Materials Science and Technologies, RoMat 2016, Bucharest, Romanya, 9 - 12 Kasım 2016, ss.118-123 identifier

Effect of Ti addition on corrosion properties of As-Cast and Hot-rolled AM60 magnesium alloys

6th International Conference on Materials Science and Technologies, RoMat 2016, Bucharest, Romanya, 9 - 12 Kasım 2016, ss.113-117 identifier

Effect of sn addition on corrosion properties of As-Cast and Hot-Rolled AZ31 magnesium alloys

6th International Conference on Materials Science and Technologies, RoMat 2016, Bucharest, Romanya, 9 - 12 Kasım 2016, ss.124-128 identifier

Microstructure and corrosion properties of homogenized AZ31 and AZ31+1%La magnesium alloys

6th International Conference on Materials Science and Technologies, RoMat 2016, Bucharest, Romanya, 9 - 12 Kasım 2016, ss.107-112 identifier

Mechanical and Microstructural Properties of SA 210 Gr C Pipes Welded by Tungsten Inert Gas

18th International Conference on Materials Science and Engineering, 26 - 27 Aralık 2016

Microstructure and Corrosion Properties of Homogenized Mg 4Zn 1La Magnesium Alloys

6th International Conference on Materials Science and Technologie, 9 - 12 Kasım 2016

Tren tekerleği ve ray çiftinin aşınma özelliklerinin belirlenmesinde block on ring konfigürasyonu kullanımı

3. Uluslararası Raylı Sistemler Sempozyumu (ISERSE'16), Karabük, Türkiye, 13 - 15 Ekim 2016, cilt.1, ss.667-670

Resıdual Stress Measurement In R260 And R260mn Qualıty Raıls

3. Uluslararası Raylı Sistemler Mühendisliği Sempozyumu (ISERSE’16), 13 - 15 Ekim 2016

TCDD Karabük Bolkuş Demiryolu Hattında 49E1 Kalite Raylarda Ondülasyon Ölçümleri ve Değerlendirilmesi

3. Uluslararası Raylı Sistemler Mühendisliği Sempozyumu, 13-15 Ekim 2016, Karabük Üniversitesi, Türkiye., 13 - 15 Ekim 2016

Influence of Head Hardening Heat Treatment Process on Fatigue Crack Growth Behavior in Rails

ISERSE’xx16 3. uluslararası Raylı Sistemler Mühendisliği Sempozyumu, 13 - 15 Ekim 2016

Influence of Head Hardening Process on Fatique Crack Growth Behavior in Rails

3. Uluslararası Raylı Sistemler Mühendisliği Sempozyumu, 13-15 Ekim 2016, Karabük Üniversitesi, Türkiye., 13 - 15 Ekim 2016

TCDD Karabük Bolkuş Demiryolu Hattında 49E1 Kalite Raylarda Aşınma Davranışı

3. Uluslararası Raylı Sistemler Mühendisliği Sempozyumu, 13-15 Ekim 2016, Karabük Üniversitesi, Türkiye., 13 - 15 Ekim 2016

TREN TEKERLEĞİ VE RAY ÇİFTİNİN AŞINMA ÖZELLİKLERİNİN BELİRLENMESİNDE BLOCK ON RING KONFİGÜRASYONU KULLANIMI

3. Uluslararası Raylı Sistemler Mühendisliği Sempozyumu, 13-15 Ekim 2016, Karabük Üniversitesi, Türkiye., 13 - 15 Ekim 2016

Residual Stress Measurement in R260 and R260mn Quality Rails

3. Uluslararası Raylı Sistemler Mühendisliği Sempozyumu, 13-15 Ekim 2016, Karabük Üniversitesi, Türkiye., 13 - 15 Ekim 2016

Yüksek dayanımlı beynitik rayların incelenmesi

3. Uluslararası Raylı Sistemler Sempozyumu (ISERSE’xx16), Karabük, Türkiye, 13 - 15 Ekim 2016, cilt.1, ss.661-666

YÜKSEK DAYANIMLI BEYNİTİK RAYLARIN İNCELENMESİ INVESTIGATION OF HIGH STRENGTH BAINITIC RAILS

3. Uluslararası Raylı Sistemler Mühendisliği Sempozyumu, 13-15 Ekim 2016, Karabük Üniversitesi, Türkiye., 13 - 15 Ekim 2016

TCDD KARABÜK BOLKUŞ DEMİR YOLU HATTINDA 49E1 KAL TE RAYLARDA AŞINMA DAVRANIŞI

3rd International Symposium on Railway Systems Engineering (ISERSE’16), October 13-15, 2016, Karabuk, Turkey, Karabük, Türkiye, 13 - 15 Ekim 2016, ss.508-512

TCDD KARABÜK BOLKUŞ BÖLGES NDEKİ 49E1 RAYLARDA ONDULASYON ÖLÇÜMLERİ VE DEĞERLENDİRİLMESİ

3rd International Symposium on Railway Systems Engineering (ISERSE’16), October 13-15, 2016, Karabuk, Turkey, Karabük, Türkiye, 13 - 15 Ekim 2016, ss.444-449

Wear Behaviors of B4C and SiC Particle ReinforcedAZ91 Magnesium Matrix Metal Composites

ICMSME 2016 : 18th International Conference on Material Science and Material Engineerin, 15 - 16 Eylül 2016

The Relationship between Fatigue Crack Growth and Residual Stress in Rails

World Academy of Science, Engineering and Technology, Roma, İtalya, 15 - 16 Eylül 2016

The Influence of Titanium Addition on Wear Properties of AM60 Magnesium Alloy

18th International Conference on Environmental Friendly Materials, Paris, Fransa, 20 - 21 Haziran 2016

Influence of Titanium Addition on Wear Properties of AM60 Magnesium Alloy

World Academy of Science, Engineering and Technology ICEFM 2016 : 18th International Conference on Environmental Friendly Materials, 20 - 21 Haziran 2016

The Effect of Aging Heat Treatment On Wear Behavior of Cu Cr Zr Alloys

International Conference on Engineering and Natural Science (ICENS 2016), 24 - 28 Mayıs 2016

Effedt of Mn element on the corrosion behavior of Mg5Al1Ti alloy in Nacl HCl solution

International Conference on Engineering and Natural Sciences (ICENS’17), Sarajevo, Bosna-Hersek, 24 - 28 Mayıs 2016, cilt.1, ss.2362

TOZ ENJEKSİYON KALIPLAMA YÖNTEMİ İLE PASLANMAZ ÇELİK 316L MALZEMENİN ÜRETİMİ VE KARAKTERİZASYONU

International Conference on Material Science and Technology in Cappadocia (IMSTEC’16), 6 - 08 Nisan 2016, ss.319-322

Rotary Bending Fatique Behavior of Steel Cord

International Conference on Material Science and Technology, 6-8 April 2016, Kapadokya, Türkiye., 6 - 08 Nisan 2016

5Al1Ti magnezyum alaşımında mikroyapı mekanik özellikler ve aşınma davranışına Mn alaşım elementinin etkisi

International conference on material science and technology in cappadocia (IMSTEC’16), Nevşehir, Türkiye, 6 - 08 Nisan 2016, ss.709

THE EFFECT OF MN ALLOYING ELEMENTS ON MICROSTRUCTURE MECHANICAL PROPERTIES AND WEAR BEHAVIOR OF 5Al1Ti MAGNESIUM ALLOY

International Conference on Material Science and Technology in Cappadocia (IMSTEC’16), 6 - 08 Nisan 2016

CORROSION BEHAVIOUR OF AA1050 B4C COMPOSITES

International Conference on Material Science and Technology in Cappadocia (IMSTEC’16), 6 - 08 Nisan 2016

Assesment of The Nitration Process Parametetrs to Improve The Wear Resistance of DIN 1 2714 Quality Hot Work Tool Steel

International Conference on Material Science and Technology, 6-8 April 2016, Kapadokya, Türkiye., 6 - 08 Nisan 2016

The Effect of Mn Alloying Elements on Microstructure Mechanical Properties and Wear Behaviour of 5Al1Ti Magnesium Alloy

International Conference on Material Science and Technology, 6-8 April 2016, Kapadokya, Türkiye., 6 - 08 Nisan 2016

PRODUCTION AND CHARACTERIZATION OF THE STAINLESS STEEL 316L BY THE POWDER INJECTION MOULDING METHOD

International Conference on Material Science and Technology in Cappadocia (IMSTEC’16), 6 - 08 Nisan 2016

AA1050 Xmg B4C kompozitlerin korozyon davranışı

International conference on material science and technology in cappadocia (IMSTEC’16), Nevşehir, Türkiye, 6 - 08 Nisan 2016, cilt.1, ss.674

Gliserin ve peg katkılarının ince alümina tozu takviyeli Na Metakaolin esaslı jeopolimer basma dayanımı ve termal davranışına tepkisi

International conference on material science and technology in cappadocia (IMSTEC’16), Nevşehir, Türkiye, 6 - 08 Nisan 2016, ss.303

R260 Kalite Raylarda Kalıntı Gerilme Sertlik ve Mikroyapı İlişkisi

2nd International Iron and Steel Symposium (IISS’15), Karabük, Türkiye, 1 - 03 Nisan 2015, ss.31-34

5Al1Si Magnezyum Alaşımına Mn İlavesinin Mg2Si Partikül Boyutuna ve Mekanik Özelliklere Etkisi

Uluslar arası katılımlı III. Ege Kompozıt Malzemeler Sempozyumu (KOMPEGE III), KUŞADASI, Türkiye, 5 - 07 Kasım 2015

Borlanmış DIN 1 4849 Kalite Dökme Çeliğin Korozif Aşınma Davranışı

2nd International Iron and Steel Symposium (IISS’15), 1 - 03 Nisan 2015, ss.524-527

Ray Çeliği Üretiminde Vakum Altında Gaz Giderme Prosesi

2nd International Iron and Steel Symposium (IISS’15), 1 - 03 Nisan 2015

Otomotiv Sektöründe Çeliğe Alternatif Mg Al Esaslı Alaşım Üretimi ve Karakterizasyonu

2nd International Iron and Steel Symposium (IISS’15), 1 - 03 Nisan 2015, ss.483-488

EFFECTS OF BISMUTH (BI) ADDITIONS ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF AZ91 ALLOY

24th International Conference on Metallurgy and Materials, Brno, Çek Cumhuriyeti, 3 - 05 Haziran 2015, ss.1124-1128 identifier identifier

RESIDUAL STRESS MEASUREMENT IN RAILS BY DESTRUCTIVE AND NON DESTRUCTIVE METHOD

24th International Conference on Metallurgy and Materials, Brno, Çek Cumhuriyeti, 3 - 05 Haziran 2015, ss.465-469 identifier identifier

CrMo Çeliklerinin Aşınma Özelliklerinin İncelenmesi

15. Uluslararası Malzeme Sempozyumu, Denizli, Türkiye, 15 - 17 Ekim 2014

An investigation on corrosion properties of Cr Mo Steels

54 International Foundry Conference, Portoroz, Slovenya, 17 - 19 Eylül 2014

Corrosion Behavior of MIG Welded St37 Quality Pipe Steels

3.International Conference on Welding Technologies and Exhibition, Manisa, Türkiye, 21 - 23 Mayıs 2014

Effect of Pb Addition on Production and Corrosion Behavior of Mg2Si Particle Reinforced Composites

6. Uluslar arası İleri Teknolojiler Sempozyumu, Elazığ, Türkiye, 16 - 18 Mayıs 2011

Effect of Ti Addition on Corrosion Behaviour of AA6063 Al Alloy

6. Uluslar arası İleri Teknolojiler Sempozyumu, Elazığ, Türkiye, 16 - 18 Mayıs 2011, ss.447

Effect of Ti Addition on Wear Behaviour of AA6063 Al Alloy

13. Uluslar arası Malzeme Sempozyumu, Denizli, Türkiye, 13 - 15 Ekim 2010

Effect of Ti on the corrosion behaviour of in-situ Mg2Si particle reinforced Al-12Si-20Mg-XTi alloys

5th International Materials Symposium MATERIAiS 2009 - 14th meeting of SPM - Sociedade Portuguesa de Materiais, Lisbon, Portekiz, 5 - 08 Nisan 2009, ss.511-516 identifier identifier