COMPOSITES PART B-ENGINEERING, cilt.80, ss.101-107, 2015 (SCI İndekslerine Giren Dergi)
Thermoplastic polyurethane (TPU) composites with fullerene loadings varying from 0.5 to 2 weight% were prepared by melt-mixing method. Nitric acid oxidation and silanization were applied to fullerene surface to improve interfacial interactions with TPU matrix. The influence of surface modifications of fullerene on mechanical, melt flow and electrical properties of TPU based composites were investigated. Incorporation of fullerene leads to nearly twofold increase in tensile strength and Young's modulus of the composites in addition to enhancing the flexibility. The best results are obtained in nitric acid and silane modified fullerene containing composites at the lowest concentration (0.5%). Higher MFI values were observed for composites loaded with surface treated fullerenes compared to pristine fullerene because of their better dispersion in TPU. Electrical properties of TPU also improved by the addition of surface modified fullerene particles. Surface oxidation and silanization gave rise to dispersion homogeneity which may be the reason of both tensile strength and strain improvements at the same time. (C) 2015 Elsevier Ltd. All rights reserved.