Comparing Properties of Adhesive Bonding, Resistance Spot Welding, and Adhesive Weld Bonding of Coated and Uncoated DP 600 Steel


Hayat F.

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, cilt.18, ss.70-78, 2011 (SCI İndekslerine Giren Dergi) identifier identifier

  • Cilt numarası: 18 Konu: 9
  • Basım Tarihi: 2011
  • Doi Numarası: 10.1016/s1006-706x(12)60037-5
  • Dergi Adı: JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL
  • Sayfa Sayıları: ss.70-78

Özet

Zinc coated dual phase 600 steel (DP 600 grade) was investigated, utilisation of which has gradually increased with each passing day in the automotive industry. The adhesive bonding (AB), resistance spot welding (RSW), and adhesive weld bonding (AWB) joints of the zinc coated DP 600 steel were investigated. Additionally, the zinc coating was removed using HCL acid in order to investigate the effect of the coating. The microstructure, tensile shear strengths, and fracture properties of adhesive bonding (AB), resistance spot welding (RSW), and adhesive weld bonding (AWB) joints of the coated and uncoated DP 600 steel were compared. In addition, a mechanical-electrical-thermal coupled model in a finite element analysis environment was utilised. The thermal profile phenomenon was calculated by simulating this process. The results of the tensile shear test indicated that the tensile load bearing capacity (TLBC) values of the coated specimens among the three welding methods were higher than those of the uncoated specimens. Additionally, the tensile strength of the AWB joints of the coated and uncoated specimens was higher than that of the AB and RSW joints. It was determined that the fracture behaviours and the deformation caused were different for the three welding methods.