Yayınlar & Eserler

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Pure Bending Fatigue Crack Propagation in Deep-Drawn Steel Cord Filaments

Metal Science and Heat Treatment, cilt.61, ss.691-697, 2020 (SCI Expanded İndekslerine Giren Dergi) identifier

A Comparative Study on Microstructure, Mechanical and Tribological Properties of A4, AE41, AS41 and AJ41 Magnesium Alloys

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, cilt.28, ss.4647-4657, 2019 (SCI İndekslerine Giren Dergi) identifier identifier

Influence of Sn addition on microstructure and corrosion resistance of AS21 magnesium alloy

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, cilt.29, ss.1413-1423, 2019 (SCI İndekslerine Giren Dergi) identifier identifier

Microstructure and corrosion properties of lanthanum-added AZ31 Mg alloys

ARABIAN JOURNAL OF GEOSCIENCES, cilt.11, 2018 (SCI İndekslerine Giren Dergi) identifier identifier

Mechanical Properties and Corrosion Behavior of As-Cast Mg-Zn-Zr-(La) Magnesium Alloys

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, cilt.27, ss.389-397, 2018 (SCI İndekslerine Giren Dergi) identifier identifier

An investigation on dry sliding wear behaviour of pressure infiltrated AA1050-XMg/B4C composites

SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS, cilt.25, ss.67-73, 2018 (SCI İndekslerine Giren Dergi) identifier identifier

The effect of GNPs on wear and corrosion behaviors of pure magnesium

JOURNAL OF ALLOYS AND COMPOUNDS, cilt.724, ss.14-23, 2017 (SCI İndekslerine Giren Dergi) identifier identifier

Effect of Sn addition on microstructure, mechanical and casting properties of AZ91 alloy

MATERIALS & DESIGN, cilt.49, ss.1009-1015, 2013 (SCI İndekslerine Giren Dergi) identifier identifier

Wettability of Aluminum-Magnesium Alloys on Silicon Carbide Substrates

JOURNAL OF THE AMERICAN CERAMIC SOCIETY, cilt.94, ss.867-874, 2011 (SCI İndekslerine Giren Dergi) identifier identifier

Diğer Dergilerde Yayınlanan Makaleler

The Immersion Corrosion Resistance of Shot Peening and MAO Applied on AZ31-0.5% La Sheets

ENGINEERING TECHNOLOGY & APPLIED SCIENCE RESEARCH, cilt.10, ss.5201-5204, 2020 (ESCI İndekslerine Giren Dergi) identifier

Ca and Ce Effect on the Corrosion Resistance of Hot-Rolled AZ31 Mg Alloys

ENGINEERING TECHNOLOGY & APPLIED SCIENCE RESEARCH, cilt.10, ss.5113-5116, 2020 (ESCI İndekslerine Giren Dergi) identifier

Production of ZrO2 Reinforced AZ31 Matrix Composites via Powder Metallurgy

Advanced Science, Engineering and Medicine, cilt.11, ss.471-474, 2019 (Diğer Kurumların Hakemli Dergileri)

Effects of Solidification Rate on Microstructure and Mechanical Properties with Sb at Different Ratio of AZ91 Quality Mg Alloy

Uluslararası Muhendislik Arastirma ve Gelistirme Dergisi, cilt.11, ss.451-463, 2019 (Diğer Kurumların Hakemli Dergileri)

AZ91 Mg Alaşımına Farklı Oranlarda Sb İlavesi İle Katılaşma Hızının Mikroyapı ve Mekanik Özelliklere Etkisi

ULUSLARARASI MÜHENDİSLİK ARAŞTIRMA VE GELİŞTİRME DERGİSİ, cilt.11, ss.451-463, 2019 (Hakemli Üniversite Dergisi)

Effect of Indium on Wettability of Sn-2Ag-0,5Cu-1In Quaternary Pb-FreeSolder Alloy

El-Cezeri Journal of Science and Engineering, cilt.6, ss.1-7, 2019 (Diğer Kurumların Hakemli Dergileri) Creative Commons License

Influence of bismuth (Bi) addition on wetting characteristics of Sn-3Ag-0.5Cu solder alloy on Cu substrate

ENGINEERING SCIENCE AND TECHNOLOGY-AN INTERNATIONAL JOURNAL-JESTECH, cilt.21, ss.1159-1163, 2018 (ESCI İndekslerine Giren Dergi) identifier identifier

Effect of carbon content and drawing strain on the fatigue behavior of tire cord filaments

ENGINEERING SCIENCE AND TECHNOLOGY-AN INTERNATIONAL JOURNAL-JESTECH, cilt.21, ss.289-296, 2018 (ESCI İndekslerine Giren Dergi) identifier identifier

Effect of Lead Additions on Microstructure and Casting Properties of AZ91 Magnesium Alloy

International Journal of Materials Science and Applications, cilt.7, ss.13-17, 2018 (Diğer Kurumların Hakemli Dergileri)

EFFECT OF COPPER ADDITIONS ON MICROSTRUCTURE CASTING AND MECHANICAL PROPERTIES OF AZ91 MAGNESIUM ALLOY

InternationalJournal of Mechanical and Production Engineering, cilt.6, ss.41-44, 2018 (Diğer Kurumların Hakemli Dergileri)

INVESTIGATION OF MICROSTRUCTURE, HARDNESS AND WEAR PROPERTIES OF MWCNT REINFORCED AZ91 MAGNESIUM MATRIX COMPOSITES

InternationalJournal of Mechanical and Production Engineering, cilt.6, ss.45-47, 2018 (Diğer Kurumların Hakemli Dergileri)

Electrochemical Corrosion Behavior of Mg-5Al-1Ti XZn Alloys

International Journal of Advances in Science, Engineering and Technology, cilt.6, ss.37-40, 2018 (Diğer Kurumların Hakemli Dergileri)

EFFECT OF Y ADDITION ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF AS-CAST MG-ZN-ZR-LA MAGNESIUM ALLOYS

InternationalJournal of Mechanical and Production Engineering, cilt.6, ss.38-40, 2018 (Diğer Kurumların Hakemli Dergileri)

A comparative study on corrosion behaviors of pearlitic rails generally used in railway tracks

Engineering and Technology Journal, cilt.2, ss.264-269, 2017 (Diğer Kurumların Hakemli Dergileri)

Effect of Sn Addition on Microstructure and Mechanical Properties of as-Cast And Hot-Rolled Am60 Magnesium Alloys

International Journal of Mechanical and Production Engineering (IJMPE), cilt.5, ss.22-24, 2017 (Diğer Kurumların Hakemli Dergileri)

Effect of Cooling Rate and 2 Wt Silicon Addition on Microstructure and Mechanical Properties of AZ91 Mg Alloys

International Journal of Mechanical and Production Engineering (IJMPE), cilt.5, ss.25-28, 2017 (Diğer Kurumların Hakemli Dergileri)

Effect of Ti Addition on Microstructure and Mechanical Properties of As-cast and Hot-rolled AZ31 Magnesium Alloys

International Journal of Mechanical And Production Engineering, cilt.5, ss.19-21, 2017 (Diğer Kurumların Hakemli Dergileri)

Effect of Sn Addition on Mechanical Properties of AS21 Magnesium Alloys

International Journal of Mechanical And Production Engineering, cilt.5, ss.33-34, 2017 (Diğer Kurumların Hakemli Dergileri)

Effect of Sn Addition on Corrosion Properties of As-Cast and Hot-Rolled AZ31 Magnesium Alloys

Key Engineering Materials, cilt.750, ss.124-128, 2017 (Diğer Kurumların Hakemli Dergileri)

Influence of Pressure Type on Powder on Powder Injection Moulding of Stainless Steel (316L) Powder

Hittite Journal of Science and Engineering, cilt.4, ss.85-90, 2017 (Diğer Kurumların Hakemli Dergileri)

“Microstructure and Corrosion Properties of Homogenized AZ31 and AZ31 1 La Magnesium Alloys

Key Engineering Materials, cilt.750, ss.107-112, 2017 (Diğer Kurumların Hakemli Dergileri)

Effect of Ti Addition on Corrosion Properties of As-Cast and Hot-Rolled AM60 Magnesium Alloys

Key Engineering Materials, cilt.750, ss.113-117, 2017 (Diğer Kurumların Hakemli Dergileri)

Microstructure and Corrosion Properties of Homogenized Mg-4Zn-1La Magnesium Alloy

Key Engineering Materials, cilt.750, ss.118-123, 2017 (Diğer Kurumların Hakemli Dergileri)

Influence of Titanium Addition on Wear Properties of AM60 Magnesium Alloy

International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering, cilt.10, ss.708-712, 2016 (Diğer Kurumların Hakemli Dergileri)

Wear Behaviors of B4C and SiC Particle Reinforced AZ91 Magnesium Matrix Metal Composites

International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering, cilt.10, ss.708-712, 2016 (Diğer Kurumların Hakemli Dergileri)

Effect of antimony additions on microstructure and mechanical properties of AZ91 alloy

Livarski Vestnik, cilt.62, ss.187-194, 2015 (Diğer Kurumların Hakemli Dergileri)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

High temperature wear performances of TiB2 and GNPs reinforced magnesium matrix hybrid composites

The International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology (IMSMATEC’xx20), İstanbul, Türkiye, 24 - 26 Haziran 2020

Paslanmaz Çelik Matrisli Fonksiyonel Derecelendirilmiş Malzeme Üretimi ve Karakterizasyonu

UDCS’19 Fourth International Iron and Steel Symposium, Karabük, Türkiye, 4 - 06 Nisan 2019

The effect of Ca and Ce on Wear Behavior of Hot-Rolled AZ31 Mg Alloys

6th International Conference on Computational and Experimental Science and Engineering, 23 - 27 Ekim 2019

Wear Properties of Micro Arc Oxidation Coated and Shot Peening Applied AZ31 Mg Sheets.

“6th International Conference on Computational and Experimental Science and Engineering (ICCESEN 2019), 23 - 27 Ekim 2019

Immersion Corrosion Properties of Micro Arc Oxidation Coated and Shot Peening Applied AZ31 Mg Sheets.

“6th International Conference on Computational and Experimental Science and Engineering (ICCESEN 2019), 23 Ekim - 27 Aralık 2019

The effect of Ca and Ce on Corrosion Resistance of Hot-Rolled AZ31 Mg Alloys

6th International Conference on Computational and Experimental Science and Engineering (ICCESEN 2019), 23 - 27 Ekim 2019

DRY WEAR BEHAVIOUR OF MAO APPLIED AZ31 SHEET ALLOYS CONTAINING NEODYMIUM

4.International Conference on Material Science and Technology, 18 - 20 Ekim 2019

INVESTIGATION OF THE EFFECT OF GNP ADDITION ON EPOXY RESIN IN 2024 T3 ALUMINUM MATRIX AND UD CARBON FIBER REINFORCED LAMINATED COMPOSITES

The Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology in Cappadocia/TURKEY (IMSMATEC’19), June 21-23 2019, 21 - 23 Haziran 2019

INVESTIGATION OF TECHNICAL CHARACTERISTICS AFTERBENDING IN P11 QUALITY STEEL PIPES

The Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology in Cappadocia/TURKEY (IMSMATEC’19), June 21-23 2019, 21 - 23 Haziran 2019

WELDING OF BINARY METHOD IN HIGH ALLOY STEELS

IMSMATEC 19, Nevşehir, Türkiye, 21 - 23 Haziran 2019

NEODİMYUM İLAVELİ ZK60 MAGNEZYUM ALAŞIMI MİKROYAPI, MEKANİK ÖZELLİK VE YORULMA DAVRANIŞININ İNCELENMESİ

The Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology in CAPPADOCIA/TURKEY (IMSMATEC’19), 21 - 23 Haziran 2019, ss.32-36

ALÜMİNYUM BRONZLARININ AŞINMA DAVRANIŞLARININ İNCELENMESİ

The Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology in CAPPADOCIA/TURKEY (IMSMATEC’19), 21 - 23 Haziran 2019, ss.59-62

1 (AĞ.OL) Ca İLAVELİ AZ31 Mg ALAŞIMLARININ AŞINMA ÖZELLİKLERİNE HADDE HIZININ ETKİSİ

The Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology, 21 - 23 Haziran 2019

Investigation of the Neodymium Additive ZK60 Magnesium Alloy Microstructure, Mechanical Properties and Fatigue Behavior

The Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology, Nevşehir, Türkiye, 21 - 23 Haziran 2019, ss.32-36

Design and Manufacturing of Bending Rotating Fatig Test Device of Small Section Solid Round Wires

UDCS’xx19 Fourth International Iron and Steel Symposium, 4-6 April, Karabuk, 4 - 06 Nisan 2019

Paslanmaz Çelik Matrisli Fonksiyonel Derecelendirilmiş Malzeme Üretimi ve Karakterizasyonu

UDCS’xx19 Fourth International Iron and Steel Symposium, 4-6 April, Karabuk, 4 - 06 Nisan 2019

Hardness Distribution in P91 Steels after Welding Process and PWHT

UDCS’xx19 Fourth International Iron and Steel Symposium, 4-6 April, Karabuk, 4 - 06 Nisan 2019

Determination of Life of Steel Pipes Used in Thermal Power Plants

UDCS’xx19 Fourth International Iron and Steel Symposium, 4-6 April, Karabuk, 4 - 06 Nisan 2019

Alüminyum-Çelik-Alüminyum Tabakalı Kompozitlerde Yorulma Davranışı

1st International Symposium on Light Alloys and Composite Materials, 22 - 24 Mart 2018

The microstructure and mechanical properties of homogenized AZ31 Mg alloys containing La in the range of 02 to 1.0

International Congress on Mathematic, Engineering, Natural and Health Science, 11 - 13 Ağustos 2018

Türkiye’de üretilen ilk R350Ht kalite rayların karekterizasyonu ve servis şartlarındaki başarısı

4. Uluslararası Raylı Sistemler Mühendisliği Sempozyumu (ISERSE’18), Karabük, Türkiye, 10 - 12 Ekim 2018

Improved Corrosion and Wear Resistance of Extruded Mg-6Zn-1La-0.5Zr (wt) Magnesium Alloy by 1 wt Y Addition

3. International Conference on Material Science and Technology in Cappadocia (IMSTEC 2018), 17 - 19 Eylül 2018

Effect of Bi on wettability of Sn-2.5Ag-0.5Cu-0.5Bi quaternary solder alloy on Cu substrate

Turkish Physical Society 34th International Physics Congress, 5 - 09 Eylül 2018

The microstructure and corrosion properties of homogenized AZ31 Mg alloys containing La in the range of 02 to 1.0

International Congress on Mathematic, Engineering, Natural and Health Science, 11 - 13 Ağustos 2018

AZ91 Alaşımına İlave Edilen Sr ve TiB Elementleri İle Soğuma Hızının Mikroyapı ve Mekanik Özellikleri Üzerine Etkisi

1st International Symposium on Light Alloys and Composite Materials (ISLAC’xx18), Karabük, Türkiye, 22 - 24 Mart 2018, ss.380-381

An investigation of the effect of La addition on wear properties of ZK60 magnesium alloy

VIIIth International Conference on Researches in Science Technology, 10 - 11 Haziran 2018

Investigation Of Microstructure, Hardness And Wear Properties Of Mwcnt Reinforced AZ91 Magnesium Matrix Composites

2018 IIER 395th International Conference on Recent Innovations in Engineering and Technology (ICRIET), 24 - 25 Nisan 2018, ss.63-65

Effect Of Y Addition On Microstructure And Mechanical Properties Of As-Cast Mg-Zn-Zr-La Magnesium Alloys.

2018 IIER 395th International Conference on Recent Innovations in Engineering and Technology (ICRIET), 24 - 25 Nisan 2018, cilt.52

Electrochemical Corrosion Behavior Of Mg-5Al-Ti-XZn Alloys

2018 IIER 395th International Conference on Recent Innovations in Engineering and Technology (ICRIET), 24 - 25 Nisan 2018, ss.59-62

Investigation Of Microstructure, Hardness And Wear Properties Of MWCNT Reinforced AZ91 Mg Matrix Composites

2018 IIER 395th International Conference on Recent Innovations in Engineering and Technology (ICRIET), 24 - 25 Nisan 2018

AM60 Alaşımının Mekanik özelliklerine İlave Edilen Sn ve Pb Elementleri İle Soğuma Hızının Etkisi

1st International Symposium on Light Alloys and Composite Materials (ISLAC’18), 22 - 24 Mart 2018

AZ91 Alaşımına Sb Elementi İlavesi İle Soğuma Hızının Mikroyapı ve Mekanik Özellikleri Üzerine Etkisi

1st International Symposium on Light Alloys and Composite Materials (ISLAC’18), 22 - 24 Mart 2018

Investigation of Rolling Capability of AZ31- 1La wt Mg Alloys

1st International Symposium on Light Alloys and Composite Materials (ISLAC’18), 22 - 24 Mart 2018

Influence of Bismuth (Bi) addition on Wetting Characteristics of Sn–3Ag–0.5Cu Solder Alloy on Cu Substrate1, Ahmet Mustafa Erer1 and Yunus Türen

1st International Symposium on Light Alloys and Composite Materials (ISLAC’18), Karabük, Türkiye, 22 - 24 Mart 2018

Effect of Indium on Wettability of Sn-2Ag-0,5Cu-1In Quaternary Solder Alloy on Cu Substrate

1st International Symposium on Light Alloys and Composite Materials (ISLAC’18), Karabük, Türkiye, 22 - 24 Mart 2018

Microstructure and Mechanical Properties of Mg-xAl-GNPs composites

1st International Symposium on Light Alloys and Composite Materials (ISLAC’18), 22 - 24 Mart 2018

Effect of homogenization treatment on microstructure and corrosion properties of Mg-4Zn magnesium alloys

1st International Symposium on Light Alloys and Composite Materials (ISLAC’18), 22 - 24 Mart 2018

, Effects of Shot Peening on The Microstructure and Corrosion Properties of AZ31 And AZ31-%0.2 La Mg Alloys

1st International Symposium on Light Alloys and Composite Materials, Karabük, Türkiye, 22 - 24 Mart 2018, ss.225

Magnezyum Malzemenin İşlenmesinde Yüzey Pürüzlülüğüne Kalay İlevesinin Etkisi

1st International Symposium on Light Alloys and Composite Materials, Karabük, Türkiye, 22 - 24 Mart 2018, ss.441

Influence of Indium Addition on Wetting Characteristics of Sn-3Ag-0.5Cu Solder Alloy on Cu Substrate

34th International Physics Congress of the Turkish-Physical-Society (TPS), Konacik, Türkiye, 5 - 09 Eylül 2018, cilt.2042 identifier identifier

Mechanical Properties of As-cast and Hot-Rolled AM60-xTi Magnesium Alloys

2nd International Conference on Materials Science and Technology, 11 - 13 Ekim 2016

CuCoNiBe Alaşımına Uygulanan Yaşlandırma Isıl İşleminin Mekanik ve Aşınma Özelliklerine Etkisinin İncelenmesi

2nd International Conference on Material Science and Technology in Cappadocia (IMSTEC’17), 11 - 13 Ekim 2017

Effect of Heat Treatment on Corrosion Behaviour of Co-Cr and Ni-Cr Implant Materials Used for Dental Application

1st International Conference of Advanced Materials and Manufacturing Technologies, 25 - 27 Ekim 2017

Comparison of Mechanical Properties of Honeycomb Composite Materials Used in Airplane Industries

1st International Conference of Advanced Materials and Manufacturing Technologies, 25 - 27 Ekim 2017

The effect of La on the Wear Resistance of the Hot Rolled AZ31 Mg Alloy

1st International Conference of Advanced Materials and Manufacturing Technologies (ICAMT’17), 25 - 27 Ekim 2017

Effect of Heat Treatment on corrosion behaviour of Co-Cr and Ni-Cr ımplant materials used for dental application

1st International Conference of Advanced Materials and Manufacturing Technologies, 25 - 27 Ekim 2017

Production of ZrO2 Reinforced AZ31 Matrix Composşites Via Powder Metallurgy

4th International Conference on Computational and Experimental Science and Engineering (ICCESEN 2017), 4 - 08 Ekim 2017

CuCoNiBe ALAŞIMINA UYGULANAN YAŞLANDIRMA ISIL İŞLEMİNİN MEKANİK VE AŞINMA ÖZELLİKLERİNE ETKİSİNİN İNCELENMESİ

2nd International Conference on Material Science and Technology in Cappadocia (IMSTEC’17), 11 - 13 Ekim 2017, ss.754

MECHANICAL PROPERTIES OF AS-CAST AND HOT-ROLLED AM60-XTİ MAGNESIUM ALLOYS

2nd International Conference on Material Science and Technology in Cappadocia (IMSTEC’17), 11 - 13 Ekim 2017, ss.764

Texture and Mechanical Properties of La added AZ31 Mg alloys

4th International Conference on Computational and Experimental Science and Engineering (ICCESEN 2017), 4 - 09 Ekim 2017

La Effect on Microstructure and Corrosion Properties of Rolled AZ31 and Modified AZ31 Mg Alloys

4th International Conference on Computational and Experimental Science and Engineering (ICCESEN 2017), 4 - 09 Ekim 2017

Pure Bending Fatigue Behaviors Of 80 C Steel Cord Filaments

3rd Iron and Steel Symposium(UDCS’17)3-5April 2017 Karabuk-TURKEY, 3 - 05 Nisan 2017

Effect of Carbon Content on the Wear Behaviour of Eutectoid Steel Wire Rod

3rd Iron and Steel Symposium(UDCS’17)3-5April 2017 Karabuk-TURKEY, 3 - 05 Nisan 2017

Accelerated Cooling Heat Treatment of Equilateral Angle and Hea-Heb Profiles

3rd Iron and Steel Symposium(UDCS’17) 3-5April 2017 Karabuk-TURKEY, 3 - 05 Nisan 2017

Corrosion Behaviour of Steel Wire Rod

3rd Iron and Steel Symposium(UDCS’17)3-5April 2017 Karabuk-TURKEY, 3 - 05 Nisan 2017

Effect of Mold Temperatures on Casting Properties of AZ91 Magnesium Alloy

4th Internatıonal conference on materials science and nanotechnology for next generation (MSNG2017), SARAYBOSNA, Bosna-Hersek, 28 - 30 Haziran 2017, ss.90

Effect of Lead Additions on Microstructure and Casting Properties of AZ91 Magnesium Alloy

4th International Conference on MaterialsScience and Nanotechnology for Next Generation (MSNG2017), SARAYBOSNA, Bosna-Hersek, 28 - 30 Haziran 2017, ss.321-328

Effect of Ti Addition on Microstructure and Mechanical Properties of As-cast and Hot-Rolled AZ31

178th International Conferences on Metallurgy Technology and Materials (ICMTM), 11 - 12 Mayıs 2017

Effect of Sn Addition on Mechanical Properties of AS21 Magnesium Alloy

178th International Conferences on Metallurgy Technology and Materials (ICMTM), 11 - 12 Mayıs 2017

Effect of Ti addition on corrosion properties of As-Cast and Hot-rolled AM60 magnesium alloys

6th International Conference on Materials Science and Technologies, RoMat 2016, Bucharest, Romanya, 9 - 12 Kasım 2016, ss.113-117 identifier

Microstructure and corrosion properties of homogenized Mg-4Zn-1La magnesium alloy

6th International Conference on Materials Science and Technologies, RoMat 2016, Bucharest, Romanya, 9 - 12 Kasım 2016, ss.118-123 identifier

Microstructure and corrosion properties of homogenized AZ31 and AZ31+1%La magnesium alloys

6th International Conference on Materials Science and Technologies, RoMat 2016, Bucharest, Romanya, 9 - 12 Kasım 2016, ss.107-112 identifier

EFFECT OF INDIUM ADDITION ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF AS-CAST AND HOT-ROLLED AM60 MAGNESIUM ALLOY

26th International Conference on Metallurgy and Materials (METAL), Brno, Çek Cumhuriyeti, 24 - 26 Mayıs 2017, ss.1537-1542 identifier identifier

Effect of sn addition on corrosion properties of As-Cast and Hot-Rolled AZ31 magnesium alloys

6th International Conference on Materials Science and Technologies, RoMat 2016, Bucharest, Romanya, 9 - 12 Kasım 2016, ss.124-128 identifier

Microstructure and Corrosion Properties of Homogenized Mg 4Zn 1La Magnesium Alloys

6th International Conference on Materials Science and Technologie, 9 - 12 Kasım 2016

TCDD Karabük Bolkuş Demiryolu Hattında 49E1 Kalite Raylarda Aşınma Davranışı

3. Uluslararası Raylı Sistemler Mühendisliği Sempozyumu, 13-15 Ekim 2016, Karabük Üniversitesi, Türkiye., 13 - 15 Ekim 2016

TCDD KARABÜK BOLKUŞ DEMİR YOLU HATTINDA 49E1 KAL TE RAYLARDA AŞINMA DAVRANIŞI

3rd International Symposium on Railway Systems Engineering (ISERSE’16), October 13-15, 2016, Karabuk, Turkey, Karabük, Türkiye, 13 - 15 Ekim 2016, ss.508-512

Wear Behaviors of B4C and SiC Particle ReinforcedAZ91 Magnesium Matrix Metal Composites

ICMSME 2016 : 18th International Conference on Material Science and Material Engineerin, 15 - 16 Eylül 2016

The Influence of Titanium Addition on Wear Properties of AM60 Magnesium Alloy

18th International Conference on Environmental Friendly Materials, Paris, Fransa, 20 - 21 Haziran 2016

Influence of Titanium Addition on Wear Properties of AM60 Magnesium Alloy

World Academy of Science, Engineering and Technology ICEFM 2016 : 18th International Conference on Environmental Friendly Materials, 20 - 21 Haziran 2016

The Effect of Aging Heat Treatment On Wear Behavior of Cu Cr Zr Alloys

International Conference on Engineering and Natural Science (ICENS 2016), 24 - 28 Mayıs 2016

Effedt of Mn element on the corrosion behavior of Mg5Al1Ti alloy in Nacl HCl solution

International Conference on Engineering and Natural Sciences (ICENS’17), Sarajevo, Bosna-Hersek, 24 - 28 Mayıs 2016, cilt.1, ss.2362

TOZ ENJEKSİYON KALIPLAMA YÖNTEMİ İLE PASLANMAZ ÇELİK 316L MALZEMENİN ÜRETİMİ VE KARAKTERİZASYONU

International Conference on Material Science and Technology in Cappadocia (IMSTEC’16), 6 - 08 Nisan 2016, ss.319-322

FARKLI SOĞUMA HIZLARI VE Si İLAVESİNİN AZ91 MAGNEZYUM ALAŞIMLARININ MİKROYAPI VE MEKANİK ÖZELLİKLERİNE ETKİSİ

1st International Conference on Engineering Technology and Applied Sciences, AFYON, Türkiye, 21 - 22 Nisan 2016, ss.27-32

AZ91 MAGNEZYUM ALAŞIMININ MİKROYAPI VE MEKANİK ÖZELLİKLERİNE ZİRKONYUM ELEMENTİNİN ETKİSİ

Uluslararası Malzeme Bilimi ve Teknolojisi Konferansı Kapadokya (IMSTEC’16), Nevşehir, Türkiye, 6 - 08 Nisan 2016, ss.521-524

CORROSION BEHAVIOUR OF AA1050 B4C COMPOSITES

International Conference on Material Science and Technology in Cappadocia (IMSTEC’16), 6 - 08 Nisan 2016

The Effect of Mn Alloying Elements on Microstructure Mechanical Properties and Wear Behaviour of 5Al1Ti Magnesium Alloy

International Conference on Material Science and Technology, 6-8 April 2016, Kapadokya, Türkiye., 6 - 08 Nisan 2016

5Al1Ti magnezyum alaşımında mikroyapı mekanik özellikler ve aşınma davranışına Mn alaşım elementinin etkisi

International conference on material science and technology in cappadocia (IMSTEC’16), Nevşehir, Türkiye, 6 - 08 Nisan 2016, ss.709

AA1050 Xmg B4C kompozitlerin korozyon davranışı

International conference on material science and technology in cappadocia (IMSTEC’16), Nevşehir, Türkiye, 6 - 08 Nisan 2016, cilt.1, ss.674

THE EFFECT OF MN ALLOYING ELEMENTS ON MICROSTRUCTURE MECHANICAL PROPERTIES AND WEAR BEHAVIOR OF 5Al1Ti MAGNESIUM ALLOY

International Conference on Material Science and Technology in Cappadocia (IMSTEC’16), 6 - 08 Nisan 2016

Gliserin ve peg katkılarının ince alümina tozu takviyeli Na Metakaolin esaslı jeopolimer basma dayanımı ve termal davranışına tepkisi

International conference on material science and technology in cappadocia (IMSTEC’16), Nevşehir, Türkiye, 6 - 08 Nisan 2016, ss.303

Rotary Bending Fatique Behavior of Steel Cord

International Conference on Material Science and Technology, 6-8 April 2016, Kapadokya, Türkiye., 6 - 08 Nisan 2016

PRODUCTION AND CHARACTERIZATION OF THE STAINLESS STEEL 316L BY THE POWDER INJECTION MOULDING METHOD

International Conference on Material Science and Technology in Cappadocia (IMSTEC’16), 6 - 08 Nisan 2016

Assesment of The Nitration Process Parametetrs to Improve The Wear Resistance of DIN 1 2714 Quality Hot Work Tool Steel

International Conference on Material Science and Technology, 6-8 April 2016, Kapadokya, Türkiye., 6 - 08 Nisan 2016

5Al1Si Magnezyum Alaşımına Mn İlavesinin Mg2Si Partikül Boyutuna ve Mekanik Özelliklere Etkisi

Uluslar arası katılımlı III. Ege Kompozıt Malzemeler Sempozyumu (KOMPEGE III), KUŞADASI, Türkiye, 5 - 07 Kasım 2015

Effect of Iron on Casting Microstructure and Mechanical Properties of AZ91 Magnesium Alloys

The Second International Iron and Steel Symposium (IISS 15), 1 - 03 Nisan 2015

Borlanmış DIN 1 4849 Kalite Dökme Çeliğin Korozif Aşınma Davranışı

2nd International Iron and Steel Symposium (IISS’15), 1 - 03 Nisan 2015, ss.524-527

EFFECTS OF BISMUTH (BI) ADDITIONS ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF AZ91 ALLOY

24th International Conference on Metallurgy and Materials, Brno, Çek Cumhuriyeti, 3 - 05 Haziran 2015, ss.1124-1128 identifier identifier

RESIDUAL STRESS MEASUREMENT IN RAILS BY DESTRUCTIVE AND NON DESTRUCTIVE METHOD

24th International Conference on Metallurgy and Materials, Brno, Çek Cumhuriyeti, 3 - 05 Haziran 2015, ss.465-469 identifier identifier

Bi ve Co İlavesinin AZ91 Alaşımının Abrasif Aşınma Davranışı Üzerine Etkisi

6th International Advanced Technologies Symposium (IATS'11), Elazığ, Türkiye, 16 - 18 Mayıs 2011, ss.334-338

AM60 Alaşımına Sn ve Pb İlavesinin Abrasif Aşınma Davranışı Üzerine Etkisi

6th International Advanced Technologies Symposium (IATS'11), Elazığ, Türkiye, 16 - 18 Mayıs 2011, ss.299-302

Bi ve Co ilavesinin AZ91 Alaşımının Abrasif Aşınma Davranışı Üzerine Etkisi

6th International Advanced Technologies Symposium (IATS’11), 16 - 18 Mayıs 2011

AZ91 Magnezyu Alaşımının Döküm ve Mekanik Özelliklerine Silisyum İlavesinin Etkisi

5th International Advanced Technologies Symposium (IATS'09), Karabük, Türkiye, 13 - 15 Mayıs 2009

AZ91 Magnezyu Alaşımının Döküm ve Mekanik Özelliklerine Kalay Elementinin Etkisi

5th International Advanced Technologies Symposium (IATS'09), Karabük, Türkiye, 13 - 15 Mayıs 2009, ss.733-737

AZ91 Magnezyum Alaşımının Döküm ve Mekanik Özelliklerine Kalay elementinin Etkisi

Uluslararası ileri Teknolojiler Sempozyumu (IATS’09), 13 - 15 Mayıs 2009

AZ91 Magnezyum Alaşımının Döküm ve Mekanik Özelliklerine Sn İlavesinin Etkisi

V.International Advanced Technologies Symposium, Karabük, Türkiye, 13 - 15 Mayıs 2007, ss.733-737

AZ91 Magnezyum Alaşımının Döküm ve Mekanik Özelliklerine Si İlavesinin Etkisi

V.International Advanced Technologies Symposium, Karabük, Türkiye, 13 - 15 Mayıs 2009, ss.817-821

Atık Plastiklerin Yüksek Fırınlarda Değerlendirilmesi

IV. Demir-Çelik Kongresi, Karabük, Türkiye, 2 - 04 Nisan 2007, ss.263-266

Kitap & Kitap Bölümleri

AZ91 ALAŞIMINA ELEMENT İLAVESİ VE UYGULANANISIL İŞLEMLERİN MİKROYAPI VE SERTLİĞE ETKİSİ

Geleceğin Dünyasında Bilimsel ve Mesleki Çalışmalar 2020 Mühendislik Bilimleri/1, PROF. DR. UĞUR ÇAVDAR,DR. ÖĞR. ÜYESİ ÇİĞDEM GÜNDOĞAN TÜRKER,DR. ÖĞR. ÜYESİ PINAR SARI ÇAVDAR,DR. ÖĞR. ÜYESİ FEYZA GÜRBÜZ,ARŞ. GÖR. DR. CANAN BAŞLAK, Editör, Ekin Yayınevi, Bursa, ss.227-254, 2020

AZ91 ALAŞIMINA ELEMENT İLAVESİ VE UYGULANANISIL İŞLEMLERİN MİKROYAPI VE SERTLİĞE ETKİSİ

GELECEĞİN DÜNYASINDABİLİMSEL VE MESLEKİ ÇALIŞMALAR2020MÜHENDİSLİK BİLİMLERİ / I, PROF. DR. UĞUR ÇAVDARDR. ÖĞR. ÜYESİ ÇİĞDEM GÜNDOĞAN TÜRKERDR. ÖĞR. ÜYESİ PINAR SARI ÇAVDARDR. ÖĞR. ÜYESİ FEYZA GÜRBÜZARŞ. GÖR. DR. CANAN BAŞLAK, Editör, Ekin Basım Yayın Dağıtım, ss.227-254, 2020